OPGW Cable Guy agarra 100kn
The Formed Wire Dead-End uses two helically shaped formed wire components: an inner layer of structural reinforcing rods and an outer-layer dead-end component to distribute axial and compressive loads over the applied area of the OPGW. The distribution of these loads reduces stresses on the central core and optical fibers of the OPGW.
Descrição dos produtos
The Formed Wire Dead-End uses two helically shaped formed wire components: an inner layer of structural reinforcing rods and an outer-layer dead-end component to distribute axial and compressive loads over the applied area of the OPGW. The distribution of these loads reduces stresses on the central core and optical fibers of the OPGW.
A full set of the tension set include dead end component, structural reinforcing rods and the matched fittings. The grip strength of this clamp is bigger than 95% of the rated tensile strength. This kind of clamp have simple structure, easy to installation and also enables to reduce the cost.
Aplicação do produto
Formado Devend de Wire para 11.5-14.1 mm opgw .
Força de tração: 100kn
Seleção de produtos
Tag: OPGW Cable Guy agarra 100kn, China OPGW Cable Guy Grips 100kn Fabricantes, fornecedores, fábrica, ADSS Cable Guy agarra 300m, ADSS Cable Guy agarra 500m, ADSS Cable Guy agarra 700m, OPGW Cable Guy agarra 100kn, OPGW Cable Guy agarra 120kn, Grip de cara pré -formado
Enviar inquérito
